Air Shafts & Parts

Air piston for Manitou 30mm forks. 
Including R7, M30 & Markhor
New design from 2020 using a quad-ring seal.

Manitou Part Code 141-33383-K001 Learn More

Machete & Marvel ISO air piston
28.2 mm OD, 18 mm tall
M6 threaded puller hole on top
Orange anodised
Use with ISO compression rod (domed top) only
Manitou Part Code: 141-28131-K015
Replacement seal: 141-28131-K022

Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Compression Rod for Tower/Minute 29" 120mm
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-29090-K004 Learn More

Manitou 32mm TS air piston
28 mm OD.
13mm recess for TS Air shaft.
White plastic
New design uses a quad-ring seal.

Manitou part code: 141-33383-K002

Learn More

2007 Minute/Marvel Comp TS air piston
28 mm OD, 13.5 mm tall
13mm recess for TS Air shaft.
Gold or Blue anodised
Manitou part code: 83-3188
Replacement seal: 141-28131-K022

Learn More

Minute/Marvel/Machete TS air piston
28 mm OD, 16.5 mm tall
M6 threaded puller hole on top, 15mm recess underneath.
Gold anodised
Manitou part code: 141-27988-K012
Replacement seal: 141-28131-K022

Learn More

Air Piston Seal (Fox)
For Fox forks.
Seal markings:
FOX RACING SHOX NOK MY 24.28  30.68  3.78  FN  2.4   036-01-036

Fox Part Code:  036-01-036 Learn More

Fox 34 Float NA2 2016-2021 air shaft assemblies
Use for repair or travel change
Fit F34 Float 2016-2021 forks with NA2 air system and 1.214" (30.8 mm) stanchion ID

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

All air shafts are new unless marked second hand.
We have a limited supply of second hand air shafts.  These have been removed from customers' bikes during service, for travel change (see grading info).  We offer a trade-in scheme for those wanting a travel change during service.  Contact us for details. Learn More

Fox 36 Float NA2 2018-2021+ air shaft assemblies
Use for repair or travel change
Fit F36 Float 2018-2021+ forks with NA2 air system and 1.287" (32.7 mm) stanchion ID (except e-bike only shafts which have ID 1.214")
The 2021+ shafts are longer (bigger negative chamber) than the 2018-20 air shafts

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fox 36 Rhythm 2019+ and Marzocchi Z1 NA2 air shaft assemblies
Use for repair or travel change
Fit F36 Rhythm 2019 & later forks with NA2 air system and 1.275" (32.4 mm) stanchion ID
These shafts have a smaller diameter piston and a different base-plate to the Fox 36 NA2 2018-20 air shaft assemblies

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fox 38 Float NA2 2021+ air shaft assemblies
Use for repair or travel change
Fit F38 Float 2021+ forks with NA2 air system and 1.214" stanchion ID

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fox 34 Rhythm 2017+ & Marzocchi Z2 air shaft assembly
140 mm travel

Fox Part Code:  820-02-370-KIT Learn More

Fox 34 Rhythm 2017+ & Marzocchi Z2 air shaft assembly
150 mm travel

Fox Part Code:  820-02-369-KIT Learn More

Manitou Axel Trace 2006 air piston.
25.4 mm OD

Manitou Part Code: 85-5580 Learn More

Replacement air piston for Manitou Black/Skareb forks One piece, over-moulded part Approximately 24.8 mm OD New Old Stock (NOS) Manitou Part Code: 85-5266 Learn More

Air Spring Assembly for E-Slide/Slide Boost X-Fusion forks

X-Fusion 2022 Part Code: 42-XFKCSDB00-140-001
X-Fusion Old Part Code: 42-SSFCSDB00-140-001 Learn More

Fox FLOAT negative coil spring set
inner and outer spring.
Fits F32, F34, F36 prior to NA and NA2.

Part Code: IN-OUT-FFK Learn More

Fox Topcap Assembly Float 36 MY18+ Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 34 Evol Performance & Factory Series forks
Fits 2021+ Fox 38 forks
Requires roll pin tool to install as it is pinned to the air shaft.
Can be installed as part of any Shockcraft service (book here)

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
Requires roll pin tool to install
Can be installed as part of any Shockcraft service (book here)

Learn More

Air Conversion Kit for Manitou Circus Expert forks.
Converts Circus forks from 2011 to current from coil to air spring
Ideal for lighter riders.
Replaces coil spring and compression rod with air piston and shaft
Aluminium stanchion forks only (will not fit Comp or Sport forks)

Shockcraft Part Code:  SC-CIRCUS-AIR-KIT Learn More

Mastodon Pro Standard 100-15 Air (Manitou)

Manitou Part Code: 141-34087-K007 Learn More

31 mm Pro and Expert piston assembly with seal and Slickoleum assembly grease
Replacement air piston for Manitou Mattoc, Magnum (2015-17) & Mastodon forks with Dorado Air spring system (valve underneath by axle)
Upgrade air piston for 2014 Mattoc forks which had the piston with the single white glide-ring
Manitou Part Code: 141-30996-K023

Learn More